From co-delivery to synergistic anti-inflammatory effect: Studies on chitosan-stabilized Janus emulsions having chloroquine phosphate and flavopiridol in Complete Freund's Adjuvant induced arthritis rat model.

For the first time, the co-delivery of chloroquine phosphate and flavopiridol by intra-articular route was achieved to provide local joint targeting in Complete Freund's Adjuvant-induced arthritis rat model. The presence of paired-bean structure onto the dispersed oil droplets of o/w nanosized emulsions allows efficient entrapment of two drugs (85.86-96.22 %). The dual drug-loaded emulsions displayed a differential in vitro drug release behavior, near normal cell viability in MTT assay, better cell uptake (internalization) and better reducing effect of mean immunofluorescence intensity of inflammatory proteins such as NF-κB and iNOS at in vitro RAW264.7 macrophage cell line. The radiographical study, ELISA test, RT-PCR study and H & E staining also indicated a reduction in joint tissue swelling, IL-6 and TNF-α levels diminution, fold change diminution in the mRNA expressions for NF-κB, IL-1ß, IL-6 and PGE2 and maintenance of near normal histology at bone cartilage interface respectively. The results of metabolomic pathway analysis performed by LC-MS/MS method using the rat blood (plasma) collected from disease control and dual drug-loaded emulsions treatment groups revealed a new follow-up study to understand not only the disease progression but also the formulation therapeutic efficacy assessment.

Analytical Quality by Design-Driven RP-HPLC Method Conditions to Concomitantly Determine Cinnarizine and Morin Hydrate in Combined Drug Solution and Dual Drug-Loaded Formulations.

BACKGROUND: The replacement of traditional oils with a camphor and menthol-based eutectic mixture is done to prepare oil-less emulsion-like dispersions for co-delivery of cinnarizine (CNZ) and morin hydrate (MH) for managing Meniére's disease (MD). Since two drugs are loaded into the dispersions, the development of a suitable reverse phase-high performance liquid chromatography (RP-HPLC) method for their simultaneous analysis becomes inevitable. OBJECTIVE: By applying the analytical quality by design (AQbD) approach, the RP-HPLC method conditions were optimized for the concomitant determination of two drugs. METHODS: The systematic AQbD started with identifying critical method attributes (CMA) through an Ishikawa fishbone diagram, risk estimation matrix, and risk priority number-based failure mode effect analysis followed by screening using fractional factorial design and optimization by face-centered central composite design. The concomitant determination of two drugs by the optimized RP-HPLC method condition was substantiated via specificity checking using combined drug solution, drug entrapment efficiency, and in vitro release of the two drugs from emulsion-like dispersions. RESULTS: The AQbD optimized RP-HPLC method conditions revealed the retention time for CNZ and MH at 5.017 and 5.323, respectively. The studied validation parameters were found within the ICH-prescribed limits. Exposing the individual drug solutions to acidic and basic hydrolytic conditions yielded extra chromatographic peaks for MH, probably due to the degradation of MH. The DEE % values of 87.40 ± 4.70 and 74.79 ± 2.94, respectively, were noticed for CNZ and MH in emulsion-like dispersions. More than 98% CNZ and MH release was occurred from emulsion-like dispersions within 30 min post-dissolution in artificial perilymph. CONCLUSIONS: Overall, the AQbD approach could be helpful for systematic optimization of RP-HPLC method conditions to estimate concomitantly other therapeutic moieties. HIGHLIGHTS: The proposed article shows the successful application of AQbD for the optimization of RP-HPLC method conditions to concomitantly estimate CNZ and MH in combined drug solution and dual-drug-loaded emulsion-like dispersions.

Studies on spray dried topical ophthalmic emulsions containing cyclosporin A (0.05% w/w): systematic optimization, in vitro preclinical toxicity and in vivo assessments.

Cyclosporin A (CsA, 0.05% w/w)-loaded positively charged emulsions were prepared based on castor oil, chitosan, poloxamer 188, glycerin and double-distilled water. To augment the shelf/storage-stability of original emulsions, the solid-dry powder for reconstitution was made by spray drying technique. The screening (Taguchi OA) and optimization (face-centered central composite) designs produced the optimized conditions for spray drying: 40 Nm3/h aspirator flow rate, 15 ml/min feed rate, 115 °C inlet temperature, 10% mannitol and 1.25% trehalose. The % drug entrapment efficiency values of original and reconstituted emulsions ranged from 73.20 ± 0.13 to 71.55 ± 1.25%. At 20 min post-dissolution, two times higher CsA release was seen from reconstituted emulsions than the original emulsions (85.78 ± 1.14 vs. 42.25 ± 1.84%) in simulated tear fluid. Using MTT assay, the reconstituted emulsions with or without CsA produced 94.512 ± 2.12 to 99.941 ± 1.89% cell viability values in HCE-2 cells. No appreciable change in capillary integrity was visualized in HET CAM following reconstituted emulsions treatment. At equivalent 15 µg drug, the in vitro protein denaturation assay showed augmented inhibition value (~ 85%) for tested CsA emulsions compared to diclofenac reference (68.30 ± 2.05) indicating enhanced anti-inflammatory activity. The CsA concentrations in multiple ocular matrices of rabbit eyes determined by the UPLC-MS/MS method attained the therapeutic drug level of 50-300 ng/ml even at 90 min post-topical instillation of both emulsions. Overall, the CsA emulsion eyedrops can be supplied as a spray dried storable intermediate product for reconstitution.

Analytical Quality-by-Design-Based Systematic Optimization of RP-HPLC Method Conditions to Analyze Simultaneously Chloroquine Phosphate and Flavopiridol in Stress-Induced Combined Drug Solution and Pharmaceutical Emulsions.

A design of experiments (DoE)-driven RP-HPLC method conditions was employed to analyze simultaneously chloroquine (CQ) phosphate and flavopiridol (FLAP) in emulsions and solution. After subjecting the various critical method attributes to preliminary risk assessment and screening by Pareto-chart-based fractional factorial design, the 17 runs were produced in Box-Behnken design for optimization. Analysis of variance, lack of fit, prediction equations, 3D response surface plots and contour plots were used to evaluate the critical analytical attributes such as retention time, tailing factor and theoretical plate count. The optimized RP-HPLC method conditions include 262 nm as detection wavelength, 37°C temperature for column, 20-µl injection volume, 1-ml/min flow rate and mobile phase mixture [70:30 ratio of 0.4% triethylamine in methanol&sodium phosphate buffer (11 mM, pH 3.0)]. The studied validation parameters were found within the ICH-prescribed limits. Exposing the combined drug solution at oxidative stress condition resulted to diminish the FLAP recovery value (53.39 ± 0.86) and arrival of an extra chromatographic peak. However, the % drug entrapment efficiency values of 96.22 ± 2.47 and 85.86 ± 3.66, respectively, were noticed for CQ phosphate and FLAP in emulsions. Thus, DoE-driven approach could be helpful for systematically optimizing RP-HPLC method conditions.

Dual Delivery of Cyclosporin A and Etodolac Using Polymeric Nanocapsules in a Rabbit Eye Model: Ocular Biodistribution and Pharmacokinetic Study.

Purpose: Commercially available eye drops are loaded only with a single drug. By using the polymeric nanocapsules, dual delivery of 0.05% w/w cyclosporin A (CsA) and 0.2% w/w etodolac (Edc) was achieved. An ultraperformance liquid chromatography/tandem mass spectrometry (UPLC-MS/MS) method was developed for determining simultaneously the biodistribution and pharmacokinetic profile of CsA and Edc in ocular tissues. Methods: After one single drop instillation of nanocapsules into healthy right eyes of rabbits, the eyeballs were enucleated at 5, 15, 30, 60, and 90 min time periods to separate the 5 different ocular tissues. A liquid/liquid extraction method was used for ocular sample extraction using darunavir as internal standard. Using 3 diverse conditions such as bench-top, autosampler, and freeze-thaw, the stability of the analytes at 3 quality control samples in ocular tissues was also checked. Results: Intra- and interday precisions for both CsA and Edc in multiple ocular tissues were <10.32%, and the accuracy was <11.98%. The % bias and % RSD values for CsA and Edc were found within the acceptable limit of ±15%. The highest Cmax values were attained in cornea for both the drugs at 60 min postinstillation time point. Despite molecular size and structural differences, both CsA and Edc after liberation from nanocapsule drops can permeate into the tissues of the anterior as well as posterior segments of the eye. Conclusion: The biodistribution and pharmacokinetic data might help and strengthen our understanding of synergetic anti-inflammatory activity of CsA and Edc from nanocapsules after its ocular topical application for managing keratoconjunctivitis sicca.

Application of Design of Experiments® Approach-Driven Artificial Intelligence and Machine Learning for Systematic Optimization of Reverse Phase High Performance Liquid Chromatography Method to Analyze Simultaneously Two Drugs (Cyclosporin A and Etodolac) in Solution, Human Plasma, Nanocapsules, and Emulsions.

The objectives of current investigation are (1) to find out wavelength of maximum absorbance (λmax) for combined cyclosporin A and etodolac solution followed by selection of mobile phase suitable for the RP-HPLC method, (2) to define analytical target profile and critical analytical attributes (CAAs) for the analytical quality by design, (3) to screen critical method parameters with the help of full factorial design followed by optimization with face-centered central composite design (CCD) approach-driven artificial neural network (ANN)-linked with the Levenberg-Marquardt (LM) algorithm for finding the RP-HPLC conditions, (4) to perform validation of analytical procedures (trueness, linearity, precision, robustness, specificity and sensitivity) using combined drug solution, and (5) to determine drug entrapment efficiency value in dual drug-loaded nanocapsules/emulsions, percentage recovery value in human plasma spiked with two drugs and solution state stability analysis at different stress conditions for substantiating the double-stage systematically optimized RP-HPLC method conditions. Through isobestic point and scouting step, 205 nm and ACN:H2O mixture (74:26) were selected respectively as the λmax and mobile phase. The ANN topology (3:10:4) indicating the input, hidden and output layers were generated by taking the 20 trials produced from the face-centered CCD model. The ANN-linked LM model produced minimal differences between predicted and observed values of output parameters (or CAAs), low mean squared error and higher correlation coefficient values in comparison to the respective values produced by face-centered CCD model. The optimized RP-HPLC method could be applied to analyze two drugs concurrently in different formulations, human plasma and solution state stability checking.

Orally Administered Drug Solubility-Enhancing Formulations: Lesson Learnt from Optimum Solubility-Permeability Balance.

Although oral drug delivery is considered as most acceptable route for administering the active pharmaceutical ingredients to patients of all age-groups with the exceptions of bed-ridden patients and infants, the extent and rate of drug reaching the systemic circulation (in other word, drug bioavailability) always depends on many factors such as drug solubility in gastrointestinal fluids and drug permeation into intraluminal epithelial membrane structure, absence (fasting state) and presence (fed state) of food materials in the gastrointestinal tract, and individual variations in gastric emptying time. Taking the most influential factors like drug solubility and its permeability into consideration, these two factors play a pivotal role and even act as the litmus test for the formulation scientists who involve in oral dosage form development. It is very clear that there should be an optimum solubility and permeability balance to be reachable for getting the desired drug bioavailability to exert the intended therapeutic activity. The objectives of current review are (1) to provide an overview of two-different categories of poorly water soluble API molecules, (2) to describe briefly three-different case studies taken from drug solubility-enhancing formulations dealing with interplay between solubility and permeability, and (3) to showcase selected examples of solubility-permeability interplay phenomena arising out from the various orally administrable dosage forms. The lessons learnt from the past and current literatures are certainly encouraging to go ahead for oral dosage form development but with the prior knowledge about the possible existence of solubility-permeability interplay/tradeoff phenomenon.